how to remove ram 1500 dt rear s
Altair Club Cars HOW TO REMOVE RAM 1500 (DT) REAR SEAT (QUICK GUIDE)

HOW TO REMOVE RAM 1500 (DT) REAR SEAT (QUICK GUIDE)

Hello there,

Hey guys it’s anson here from weekend garage just wanted to show you guys how to remove the rear back seat for your around 1500 this is the dt model you can remove it for any reason you’d like such as installing a subwoofer installing a gun rack first off you’re going to need it e 12 external torques bit right here this is going to be for two of the screws that

Require this head such as left and right right here so i already took it out cuz it was pretty hard to take out i don’t want to show that on camera in waste time in the back here it’s gonna be a 18 mil socket i used the wrench for the right side i used a wrench and for the left side i used a ratchet i just thought it was easier this way and saves more time i almost

Pulled out the breaker bar actually it was so tight so it’s gonna make this easier as removing the seat belt buckle first there’s an elastic band at the end if you pull it up a little bit you’ll see that there’s a black elastic that wraps around what we’re gonna do is try to feed this what i did to get the seat belt out is that worked from down here as you can

See there’s a rubber band right there i just fed it through from down here didn’t even have to fold the seat down the rest just that’s it you free the seat belt for the middle seat by the side seat here and continue taking it off just make sure you don’t scratch this part michelle for the metals i just put on the carpet here you can wrap it with a glove too if you

Want so yeah we’re gonna continue taking this off so took me about ten minutes just to get that bolt out i could have rammed it with like an air wrench or impact i just want to snap it in there not bad using a wrench you can gauge if it’s gonna break right i mean you can use a breaker bar if you want let’s take this out that’s somewhere safe i’ll show you how to

Get the seed out all right so i’ll just give you some advice on how to get the seed out i can do it with one hand because it’s quite heavy so as you can see there’s two see looking rails here how that thing hooks on it looks like this on the back of the chair just clips on like that it’s very vertical there’s no bends or anything so you just got to lift the whole

Thing up and then out he’s bring it out to be careful not to scratch any of your paint but there’s no locking clips or weird harnesses you have to disconnect on this side at least i’ll show you what the clips look like on the back of the seat just one seconds if you take a look at this drawing that i created the white can represent the back of the seat hook what

You’re gonna have to do is follow the yellow arrows just lift straight up there’s no special clips you have to disconnect there special techniques you literally just lift it straight up no hands or anything so you just got to lift the whole thing up and then out he’s bringing out to be careful not to scratch any of your paint but there’s no locking clips or weird

Harnesses you have to disconnect on this side at least i’ll show you what the clips look like on the back of the seat just one second so the back of the seat and then there’s two of them same thing i listen but this looks like i see when i clip that hooks onto the sea so it’s quite forward straight forward it’s left us straight up anyways thanks for watching hope

This video helped you guys out let me know if you have any other questions take care

Transcribed from video
HOW TO REMOVE RAM 1500 (DT) REAR SEAT (QUICK GUIDE) By Weeknd Garage

Related Post