The start of a new adventure that will alter our lives and the future of our planet. During the production of the EV6, Kia’s first dedicated electric vehicle, The video explains how the EV6’s basic technology works.
So do kia’s first all-electric vehicle the ev6 offers excellent value to consumers for long-range driving the driving range on a single charge is up to 475 kilometers with an 800 volt super high speed charger the time needed to charge the battery from 10 to 80 percent has been reduced to less than 18 minutes additionally by including a heat pump that
Efficiently utilizes waste heat generated by the heater in winter the driving distance in winter has also been increased smart regeneration system 2.0 is a function that automatically adjusts the amount of regenerative braking based on the traffic ahead and navigation map info first if you pull the right paddle shift for one second the regenerative braking icon will
Be displayed as auto the color changes when a vehicle is ahead or a speed camera is detected and the amount of regenerative braking automatically increases or decreases to facilitate efficient driving ipedal is a driving mode that allows you to accelerate decelerate and stop using only the accelerator pedal in level three of regenerative braking if you pull
The left paddle shift lever the ipedal function will turn on and the instrument cluster will display the word ipedal when the ipedal function is on if you pull the right paddle shift lever or shift to drive after shifting to reverse the ipedal function will turn off and level three of regenerative braking will resume the eb6 uses an 800 volt super high speed charger
As well as conventional high speed chargers without a separate device as it has a multi-charging system thanks to the patented technology in our egmp platform you can charge the battery by boosting the voltage from 400 volts to 800 volts by operating the vehicle’s motor as a charger a door for the electric charging port along with accutators and controllers has been
Added and can be opened and closed with the button on the bottom of the crash pad and the led lamp level indicates the charge level and charging mode status when charging noise may occur due to the operation of air conditioner compressor and cooling fan used for battery cooling but this is normal the charge level is displayed in four levels it takes 1.5 seconds
For the charging door to open and to close it can be opened and closed through kia connect too the v2l function allows you to use home appliances and electronic devices in various environments such as outdoor activities and camping you can use up to eighty percent of the battery’s maximum capacity this is enough power for a family of four for approximately
Five days however for safety reasons it cannot be used while charging it can be used when the vehicle is stopped while driving or in ev mode you can use the indoor v2l port located under the rear seat or after connecting to the v2l connector you can use the vehicle’s external charging port kia movement that inspires thanks for watching subscribe the real wheels arena for more video
Transcribed from video
2022 Kia EV6 – Manufacturing Process, and Features By Real Wheels Arena
